
Explosion-proof Split AC
Introduction:
This explosion-proof split AC is actually the explosion-proof version of comfort wall mounted split ACs. This air conditioner consists of an indoor unit and an outdoor unit, with the indoor unit being an explosion-proof type. The outdoor unit mainly consists of a flameproof electrical control box, compressor, heat exchanger, four-way solenoid valve, pressure switch, and fan (equipped with a flameproof electric motor). The indoor unit mainly consists of a flameproof electrical control box, a fan (equipped with a flameproof motor), an intrinsic safety control panel, and a flameproof electrical control box.
The explosion-proof level is ExdibmbIICT4, which can be used in all explosion-proof areas: Zone 1, Zone 2, and all places. It belongs to Class II explosion-proof electrical equipment.

Application Environment:
The air conditioner can work normally under the following environmental conditions:
-
a. Atmospheric pressure of 80-110KPa;
-
b. Environmental temperature: During refrigeration, indoor temperature ranges from 17 ℃ to 32 ℃, and outdoor temperature ranges from 18 ℃ to 40 ℃, During heating, the indoor temperature should not exceed 30 ℃, and the outdoor temperature should be between -7 ℃ and+24 ℃;
-
c. Relative humidity of the air: In humid months, the monthly average high relative humidity should not exceed 90%; At the same time, the monthly average low temperature for that month is not higher than+25 ℃;
-
d. Hazardous areas in Zone 1 or Zone 2 where there are explosive gas mixtures formed by combustible gases, vapors, and air in groups T1-T4 of Class IIA and IIB;
-
e. Places without severe vibration and impact;
-
f. In a clean environment free from dust and water immersion.

Specifications:




